|
See details
|
TransGo 700R4 Street/Strip Shift Kit w/accumulator pistons Late 1987-1993
Part Number: TGSSSKWACC88UP700
This "modified" Trans-Go Performance Shift Kit is very streetable, nice part throttle & firm WOT shifts. For all Late 1987 & up 700R4's. Works best with 10" or smaller diameter torque converter. I use this kit in all of my Performance transmission build ups. An external trans cooler is recommended.
Price: $161.82
|
|
See details
|
Sonnax 2nd Gear Super Hold Servo
Part Number: Sonnax2ndServo700R4
With 650HP+, this servo is a excellent upgrade when trying to keep the balance of smooth part throttle shifts and firm WOT shifts. Retains the desired cushion springs, is much easier on the drivetrain, as opposed to the "billet" servo, which can be very hard on parts.
Price: $91.50
|
|
See details
|
Beast Sunshell 4L60E
Part Number: BEASTSSHELL4L60E
This Heavy Duty sunshell easily solves a somewhat common problem, the stripping out or the breakage of the rear splined area of the factory sunshell. The Beast is the strongest sunshell on the aftermarket available. Comes with low support thrust washer. Fits all 4L60E's.
Price: $46.00
|
|
See details
|
700R4 Trans-Go Hi-Rev 3-4 & Forward Clutch Spring Kit
Part Number: 700TGCS
Trans-Go 3-4 & forward clutch spring kit: This spring pack prevents centrifugal 3-4 clutch apply up to 7,800 rpm, & furnishes a cleaner 3-4 clutch release on a 3-2 or 3-1 downshift. This kit is required in all HD applications, & where shifts occur at 5,000 rpm or above.
Price: $14.97
|
|
See details
|
700R4 Street/Strip Performance Upgrade Late 1987 - 1993
Part Number: UGSS700
Finally, a "somewhat simple" way of getting the 700R4 to hold up to more than 600HP without having the whole unit rebuilt, your transmission must be in good running condition, (rebuilt recently) or less than 35,000 miles. Complementary DVD for rebuilding the 700R4 comes with this kit at no charge.
Price: $387.22
|
|
See details
|
700R4 Street/Strip 3-4 Clutch Pack
Part Number: SSCL-2
This is a "proven" 3-4 clutch setup. Works very well in Street/Strip applications, where durability & capacity are both needed for Hi-Performance conditions.
Price: $71.81
|
|
See details
|
700R4 Road Race/Super Heavy Duty 3-4 Clutch Pack
Part Number: RRCL-1
This 3-4 clutch setup has worked very well, where many 2-3 upshifts and 3-2 downshifts occur in rapid succession, this is known as cycling, & where more heat than normal is generated. This requires thicker steels to act as a "heat sink".
Price: $59.99
|
|
See details
|
700R4 Raybestos Modified 3-4 clutch Z-Pak
Part Number: UGRAYMOD34PAK
This "modified" 3-4 clutch Raybestos Z-Pak now contains 16 instead of the 14 one sided clutches in the standard setup. Since "coning" cannot be prevented due to the "dynamics" of the 3-4 clutch apply, the additional clutches will give more capacity, handles more torque & horsepower.
Price: $72.81
|
|
See details
|
700R4 Pro Street Performance Upgrade Late 1987 - 1993
Part Number: UGPS700
Finally, a "somewhat simple" way of getting the 700R4 to hold up to more than 650+HP without having the whole unit rebuilt, your transmission must be in good running condition, (rebuilt recently) or less than 35,000 miles. Complementary DVD for rebuilding the 700R4 comes with this kit at no charge.
Price: $395.22
|
|
See details
|
700R4 Pro Street or Strip Only 3-4 Clutch Pack
Part Number: UGPS34CL700
This 3-4 clutch setup has proven to last longer in high horsepower/torque combinations than any other 3-4 clutch setup so far. This setup is a "must" for high horsepower applications. Giving the longest life with the Trans-Go "modified" Performance Shift kit.
Price: $79.16
|
|
See details
|
700R4 Input Drum Reinforcement Sleeve w/Machined Overrun Piston & Seal
Part Number: UGSTSL700
The input drum can get into trouble at around 550-600 FWHP. The input shaft can split the aluminum input drum open. The Input Drum Reinforcement Sleeve prevents splitting the input drum open. Comes w/machined overrun piston, & both seals. For off road & drag racing. 700R4 only. Installs easily.
Price: $42.00
|
|
See details
|
700R4 Heavy Duty 3-4 Clutch Pack
Part Number: HDCL-1
This 3-4 clutch setup is what I use for my Heavy Duty Street applications, where durability & capacity are both needed for Heavy Duty conditions.
Price: $54.12
|
|
See details
|
700R4 Corvette Servo w/seals
Part Number: 700CVS
This servo will improve 2nd & 3rd gear shifts at part & wide open throttle. Much more streetable than the "overkill" billet servo. Comes with Viton apply seals & OE cover & guide seals. This servo comes stock in all Corvettes.
Price: $20.55
|
|
See details
|
700R4 Corvette Servo & Boost Valves
Part Number: 700 662
The Corvette servo will improve 2nd & 3rd gear shifts at part & wide open throttle. The .500 boost valve improves line pressure in the "D" position, while the .296 intermediate/reverse boost valve improves the manual "1st to 2nd" gear shift. A must if you manually shift the transmission.
Price: $45.86
|
|
|